Skip to main content

Partial Thromboplastin Time (PTT) Test

By ok learning

Partial Thromboplastin Time (PTT) Test









What is a PTT (partial thromboplastin time) test?

A partial thromboplastin time (PTT) test measures the time it takes for a blood clot to form. Normally, when you get a cut or injury that causes bleeding, proteins in your blood called coagulation factors work together to form a blood clot. The clot stops you from losing too much blood.
You have several coagulation factors in your blood. If any factors are missing or defective, it can take longer than normal for blood to clot. In some cases, this causes heavy, uncontrolled bleeding. A PTT test checks the function of specific coagulation factors. These include factors known as factor VIII, factor IX, factor X1, and factor XII.

What is it used for?

A PTT test is used to:
  • Check the function of specific coagulation factors. If any of these factors are missing or defective, it can mean you have a bleeding disorder. Bleeding disorders are a group of rare conditions in which blood doesn't clot normally. The most well-known bleeding disorder is hemophilia.
  • Find out if there is another reason for excessive bleeding or other clotting problems. These include certain autoimmune diseases that cause the immune system to attack coagulation factors.
  • Monitor people taking heparin, a type of medicine that prevents clotting. In some bleeding disorders, the blood clots too much, rather than too little. This can cause heart attacks, strokes, and other life-threatening conditions. But taking too much heparin can cause excessive and dangerous bleeding.

Why do I need a PTT test?

You may need a PTT test if you:
  • Have unexplained heavy bleeding
  • Bruise easily
  • Have a blood clot in a vein or artery
  • Have liver disease, which can sometimes cause problems with blood clotting
  • Will be getting surgery. Surgery can cause blood loss, so it's important to know if you have a clotting problem.
  • Have had multiple miscarriages
  • Are taking heparin

What happens during a PTT test?


A health care professional will take a blood sample from a vein in your arm, using a small needle. After the needle is inserted, a small amount of blood will be collected into a test tube or vial. You may feel a little sting when the needle goes in or out. This usually takes less than five minutes.

Will I need to do anything to prepare for the test?

You don't need any special preparations for a PTT test.

Are there any risks to the test?

There is very little risk to having a blood test. You may have slight pain or bruising at the spot where the needle was put in, but most symptoms go away quickly.

What do the results mean?

Your PTT test results will show how much time it took for your blood to clot. Results are usually given as a number of seconds. If your results show that your blood took a longer-than-normal time to clot, it may mean you have:
  • A bleeding disorder, such as hemophilia or von Willebrand disease. Von Willebrand disease is the most common bleeding disorder, but it usually causes milder symptoms than other bleeding disorders.
  • Liver disease
  • Antiphospholipid antibody syndrome or lupus anticoagulant syndrome. These are autoimmune diseases that cause your immune system to attack your coagulation factors.
  • Vitamin K deficiency. Vitamin K plays an important role in forming coagulation factors.
If you are taking heparin, your results can help show whether you are taking the right dose. You will probably be tested on a regular basis to make sure your dosage stays at the right level.
If you are diagnosed with a bleeding disorder, talk to your health care provider. While there is no cure for most bleeding disorders, there are treatments available that can help manage your condition.

Is there anything else I need to know about a PTT test?

A PTT test is often ordered along with another blood test called prothrombin time. A prothrombin time test is another way to measure clotting ability.
Show references









The medical information provided is for informational purposes only, and is not to be used as a substitute for professional medical advice, diagnosis or treatment. Please contact your health care provider with questions you may have regarding medical conditions or the interpretation of test results.
In the event of a medical emergency, call 911 immediately.





Labels:

Comments

Post a Comment

Popular posts from this blog

Mueller Hinton Agar

By
Mueller Hinton Agar (MHA)       The major use of Mueller Hinton Agar is for antimicrobial susceptibility testing. Composition of MHA Ingredients   Beef Extract                                  2.00 gm Acid Hydrolysate of Casein         17.50 gm Starch                                           1.50 gm Agar                                             17.00 gm Distilled Water                             1000 ml Final pH 7.3 ± 0.1 at 25ºC Why Mueller Hinton agar is used for antibiotic susceptibility testing? 1.     It is a non-selective, non-differential medium. This means that almost all organisms plated on here will grow. 2.     It contains starch. Starch is known to absorb toxins released from bacteria, so that they cannot interfere with the  antibiotics . It also mediates the rate of diffusion of the antibiotics through the agar. 3.     It is a loose agar. This allows for better diffusion of the antibiotics than most other plates. A bette
Post a Comment
Read more

Urease Test

By
Urease Test The urease test is used to determine the ability of an organism to split urea, through the production of the enzyme urease. Principle  Urea  is the product of decarboxylation of  amino acids . Hydrolysis of  urea  produces  ammonia  and  CO2 . The formation of  ammonia  alkalinizes the medium, and the pH shift is detected by the color change of  phenol red  from  light orange  at pH 6.8 to  magenta (pink)  at pH 8.1. Rapid urease-positive organisms turn the entire medium  pink  within 24 hours. Weakly positive organisms may take several days, and negative organisms produce  no color change  or  yellow  as a result of  acid production . Uses  1.     This test is used to differentiate organisms based on their ability to hydrolyze urea with the enzyme urease. 2.     This test can be used as part of the identification of several genera and species of Enterobacteriaceae, including  Proteus, Klebsiella ,
Post a Comment
Read more

INTRODUCTION TO MYCOLOGY

By ok learning
MYCOLOGY INTRODUCTION TO MYCOLOGY Contents 1 Objective 2 Meaning 3 Growth 4 General structures FUNGI: 1 Purpose · Types of colors and definitions · Separation of yeast and mold 2.Definition Mycology is a fossil science study. Mycosis is a fungal infection. Yeast is a large cell, with only one type of cells, most of which are non-transplantation, called budding. Mold is a multicellular cell. Most of the fertilized egg is enlarged. 3 Growth a.Yeast: routine incubation temperature is usually 25c b. Mold: routine incubation temperature is usually 25c o to 30c o , although 35c o incubation can be used to differentiate some mold based on temperature tolerance or determine whether organisms are diphasic. c. Diphasic (dimorphic fungi): These organisms differ in two forms depending on temperature. d. Frequently used media The most common use of: - spermatozoa-Sabouraud's dextrose agar (SDA) - Sabouraud's dextrose agar
Post a Comment
Read more